Table of Contents
Advertisement
Installation & Setup (cont.)
Low Profile Castors (CVM-11/13)
Tipping hazard!
contact the floor if low profile castors are present.
1. Access the appliance bottom.
2. Position the low-profile castor in the rail assembly. See fig. 11.
3. Insert the castor pin through the rail assembly and the low-
profile castor. See fig. 12.
4. Install the retaining ring. See fig. 13.
5. Repeat steps 2-4 for remaining low profile castors.
6. Lower front leveling legs until they contact the floor.
Page 14 of 32
WARNING!
Always verify front leveling legs
CVM
Fig. 11. Position the castor.
Fig. 12. Insert the pin.
Fig. 13. Install retaining ring.
07/25/2023
P#852342
TEC_TM_184 | REV. B | EN
truemfg.com
Advertisement
Table of Contents
