Hp 5900Af-48G-4Xg-2Qsfp - HP 5920 Switch Series Installation Manual

(9) ACT LED for the management Ethernet port
The HP 5900AF-48XGT-4QSFP+ switch comes with the power supply slots empty and the filler modules
for the slots as accessories. You can install one or two power supplies for the switch as needed. In
48, two LSVM1AC650 power supplies are installed. For more information about installing and removing
the power supply, see
The HP 5900AF-48XGT-4QSFP+ switch also comes with the fan tray slots empty. You must install two fan
trays for the 5900AF-48XGT-4QSFP+ for adequate heat dissipation, and their models must be the same.
In Figure 48, two LSWM1HFANSC fan trays are installed. For more information about installing and
removing the fan tray, see
Figure 46 Left side panel
(1) Primary grounding point

HP 5900AF-48G-4XG-2QSFP+

Figure 47 Front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(3) SFP+ port
(5) QSFP+ port
(7) System status LED (SYS)
Figure 48 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
"Installing/removing a power
"Installing/removing a fan
(10) USB port
supply."
tray."
(2) Auxiliary grounding point 1
(2) 10/100/1000Base-T autosensing Ethernet port LED
(4) SFP+ port LED
(6) QSFP+ port LED
(2) Management Ethernet port
39
Figure