Rack-mounting procedures at a glance
Figure 4 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
Attaching the mounting brackets, chassis rails, and grounding
cable to the chassis
The switch has one front mounting position (near the network ports) and one rear mounting position (near
the power supplies).
The switch has one primary grounding point (with a grounding sign) and two auxiliary grounding points.
Use the primary grounding point whenever possible. If the primary grounding point fails or is not suitable
for the installation site, use one of the auxiliary grounding points.
Figure 5 Mounting and grounding positions of the HP 5700-32XGT-8XG-2QSFP+/HP
5700-32XGT-8XG-2QSFP+ TAA switch
(1) Auxiliary grounding point 2
(3) Primary grounding point
(5) Front mounting position
(2) Rear mounting position
(4) Auxiliary grounding point 1
9