Rack-Mounting Procedures At A Glance; Attaching The Mounting Brackets, Chassis Rails, And Grounding Cable To The Chassis - HP 5920 Switch Series Installation Manual

(1) Chassis rail

Rack-mounting procedures at a glance

Figure 4 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
Attaching the mounting brackets, chassis rails, and grounding
cable to the chassis
Each of the HP 5920 and 5900 switches has one front mounting position (near the network ports) and
one rear mounting position (near the power supplies).
Each of the HP 5920AF-24XG and 5920AF-24XG TAA switches has one primary grounding point (with
a grounding sign) and one auxiliary grounding point, and each of the HP 5900AF-48XG-4QSFP+,
5900AF-48XG-4QSFP+
5900AF-48XGT-4QSFP+, and 5900AF-48G-4XG-2QSFP+ switches has one primary grounding point
(with a grounding sign) and two auxiliary grounding points. Use the primary grounding point whenever
possible. If the primary grounding point fails or is not suitable for the installation site, use one of the
auxiliary grounding points.
Figure 5 Mounting and grounding positions of the HP 5920AF-24XG/5920AF-24XG TAA
TAA, 5900CP-48XG-4QSFP+,
7
(2) Slide rail
5900CP-48XG-4QSFP+8Gb FC B-F,