Table of Contents
Advertisement
8.1
Status display
Switching the display screen
: press button.
The following values and displays appear one after another:
•
The temperature sensors of the system set, and the corresponding
current temperature values
•
Outputs and corresponding running times
•
Functions, and their additional measured values
The additionally set functions are displayed.
8.2
Temperature sensor min/max display
Display of the min/max values
: choose the desired temperature sensor.
SET: access the information window.
The min/max values are displayed.
Resetting the min/max values
SET: press button for sec.
The min/max values are reset to the current temperature.
NOTE
The minimum and maximum values of the connected temperature sen-
sors are always logged and accessible.
The values stored can be reset at any time.
8.3
Operating hours display for pumps and
switching valves
Display of the operating hours
: choose the desired pump or valve.
SET: access the information window.
The hours-of-operation logger is displayed.
Resetting the operating hours
Operating hours called up.
✓
SET: press button for approx. sec.
The delta value (∆) is reset to zero.
The outputs' operating hours are always stored.
Here, a distinction is made between total operating hours (∑) and delta
operating hours (∆). The total operating hours cannot be reset. How-
ever, delta operating hours can be reset to zero at any time.
86
EN
Display example
Display example
Display example
730.137 | 08.37
Advertisement
Table of Contents
