Key Functions - Simrad RS20 User Manual

12 |

Key functions

The following describes the direct functions of the keys/knobs.
Where necessary, additional detail on any menus accessed by keys is
covered in following chapters.
4
1
2
5 6
1.
Channel knob / Press to Select
Turn knob for channel selection, menu scrolling, alphanumeric entry, and
fine adjustment of backlight level (dependent on active menu).
Short press to make selections in menus.
Long press to open MY CHANNELS.
2.
VOL / SQL
Volume and Squelch level.
Short press knob to select which control to adjust. Which is currently
selected is indicated by a small triangular arrow above the level bar for
each option. Turning the knob clockwise increases setting, anti-clockwise
decreases it. Volume control is common to internal and external speaker.
Long press to open SHORTCUTS.
3.
EXIT
Press EXIT when navigating menus, to clear incorrect entries, to exit from a
menu without saving changes, and to back up to the previous screen.
4.
DSC CALL / MENU SELECT
Short press to enter the DSC Call Menu and make DSC calls.
Long press to open the MENU SELECT page.
5.
Power / Backlight
Short Press to adjust backlight level sequentally.
Repeated short press of the power button will step through large backlight
adjustments. The Channel knob can be used to make finer adjustments.
Long press to turn radio on or off.
6.
Weather Channel
Short press (US/CAN models): press to hear the most recently selected
NOAA/Canadian weather station.
For all other models, changes channel to user programmed choice.
Long press (non US/CAN models only): to store current channel as the
General Information |
3
7 8 9 10
RS20 operator manual
12 13
11
9