User Programmable Key - Simrad RT62 Instruction Manual

RT62 & RT64
NOTE
18

2.7.1 User Programmable Key

To program the user key function, turn the radio off, then press
and hold the user key on the fistmike while switching the radio
on (Fig 2.11) - the display on the radio will show UP (User
Programming).
Press and hold
while switching
the radio on
Fig 2.11 - Programming the user key to activate Dual Watch
• To select backlight, press F (
• To select Dual Watch, press D/W
• To select the User Channel, press 16 (P - non scan versions)
• To select 1/25W, press 1/25
When the function has been programmed, the display will
show OK The radio should then be turned off - when it is
switched on again the radio will return to normal operation
with the fistmike user key programmed as specified.
The default setting for the fistmike user key is select User
Channel.
F
1/25
M+
16
D/W
SCN
MS
on non scan versions)
E04074