Display - Simrad RS20 User Manual

Table of Contents

Advertisement

Display

This menu allows the user to partially customize the screen
information displayed, and adjust the screen for best visibility to suit
the user and operating conditions.
Time display
Select to switch the display of Time to ON or OFF.
If turned ON, the display of COG/SOG is turned off, due to screen
space constraints.
LOC (Local Time) is displayed below the time if a UTC (Coordinated
Universal Time) offset has been entered; otherwise UTC is shown in
it's place if no offset has been applied.
POS display
Select to switch ON or OFF the display of position provided from
connected GPS. If no GPS is connected and a manual entry has
been made, the position will be displayed prefixed with an 'M' .
COG/SOG
Select to switch ON or OFF the display of COG/SOG provided from
connected GPS.
If turned ON, Time display is turned OFF, due to screen space
constraints.
Backlight
Backlight level
Select to make adjustment to the backlight level using the Channel
knob. Range is OFF, then 1 to 10.
Press MENU SELECT button to activate night mode (inverts display).
Network group
Set this value to the same as other B&G devices on NMEA 2000 in
order to control backlight levels simultaneously. To keep backlight
control inpedenent, set to a value not used elsewhere.
Contrast
Select to make adjustment of the screens contrast, using the
Channel knob. Range is 00 to 10.
| 17
The radio menus |
RS20 operator manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents