Ricoh PostScript3 Operating Instructions Manual page 48

PostScript3 printer driver - Setting Up for Printing
[Printer Specific Options]
Printer specific options are displayed when selecting "Printer Specific Options"
in the drop down menu of the print screen.
1
Note
❒ Under Mac OS Χ, this is called [Printer Features] and it is separated into [Fea-
tures 1] tab, [Features 2] tab and [Features 3] tab. Depending on the version,
[Features x] is displayed as [Set x] (x is a number). Make adjustments according
to the version you use.
❒ Under Mac OS Χ, settings for installed options cannot be set. When using
functions that require options, make sure that the options are installed before
adjusting the settings.
❖ [Resolution:]
The resolution is fixed.
❖ [Printer-Side Operation]
It is possible to perform a few things using both the machine's display panel
and the printer driver installed in your Macintosh. When [Printer-Side Opera-
tion] is set to "On", the following items are enabled on the display panel.
• Speed Select
• Cycle Setting
• Separate
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto Cy-
cle".
❖ [Reset Printer Panel]
When set to "On", the machine settings return to their defaults before Master
Making.
❖ [Cycle Setting]
You can select the cycle setting mode of master making and printing.
❖ [Eco. Mode]
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ [Speed Select]
You can select the printing speed.
44