Table of Contents
Advertisement
[Advanced] tab
When clicking items to be set, the "Change Setting" box appears. Select the items
to be set from the "Change Setting" box.
❖ [Paper/Output]
❖ "Paper Size"
Select the size of the paper to be printed.
Limitation
❒ All of the paper sizes which are registered on Windows NT 4.0 are dis-
played. However, do not select paper sizes that cannot be used by this
printer.
Note
❒ It is possible to set custom paper sizes when selecting [PostScript Custom
Page Size]. See p.37 "Printing on custom sized paper".
❖ "Paper Source"
Specify a paper feed tray where the paper to be used is loaded.
Note
❒ Select "Paper Feed Tray" here.
❖ "Print on Both Sides(Duplex Printing)"
Prints on both sides of sheets, Select one of the following settings:
• None
Disables Duplex Printing.
• Long Side
Prints output so that you can open it from the long edge when bound along
the long edge.
• Short Side
Prints output so that you can open it from the short edge when bound
along the short edge.
Limitation
❒ Duplex printing is possible on the following paper sizes only: A4K, 8
× 11"K and B5 JISK. If other sizes are selected, the machine will print
them in normal printing mode.
❖ [Graphic]
❖ "TrueType Font"
TrueType Font can replace printer fonts by following the "Font Substitu-
tion Table" when "Substitute with Device Font" is selected.
Windows NT 4.0
1
1
/
"
2
33
Advertisement
Table of Contents
