Table of Contents
Advertisement
❖ "Separate"
When set to "On", classifying will occur whenever the document data
changes.
❖ "Enable short master"
You can select whether to set the length of the master automatically.
❖ "Rotate image"
When set to "180 degrees", the image will be rotated 180 degrees and print-
ed. This is very convenient when printing on envelopes. See p.40 "Printing
onto envelopes"
❖ "Brightness"
The brightness of the whole printed image can be adjusted to one of seven
levels.
Note
❒ The brightness of the color of characters does not change.
❖ "Line Density (lpi)"
You can select the screen ruling (resolution).
❖ "Separate into CMYK"
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If "Don't Separate" is selected, separation will not be done.
[Job Log] Tab
This tab is used to adjust the settings for plug-in modules. The plug-in modules
are modules that provide additional functions that cannot be implemented by
the printer driver or PPD file.
Limitation
❒ These functions cannot be accessed from an application that use its own print-
er driver, such as PageMaker, etc.
Note
❒ The settings adjusted using this tab are used until the values for the settings
are adjusted again.
❖ [User ID:]
Enter the User ID to be displayed in Job History in SmartDeviceMonitor for
Client and SmartDeviceMonitor for Admin.
Windows NT 4.0
1
35
Advertisement
Table of Contents
