Table of Contents
Advertisement
PostScript3 printer driver - Setting Up for Printing
❖ [Printer Features]
❖ "Printer-Side Operation"
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When "Printer-Side Operation" is set to "On", the
1
following items can be set on the display panel.
• Speed Select
• Cycle Setting
• Separate
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto
Cycle".
❖ Reset Printer Panel
When set to "On", the machine settings return to their defaults before Mas-
ter Making.
❖ "Cycle Setting"
You can select the cycle setting mode of master making and printing.
❖ "Eco. Mode"
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ "Speed Select"
You can select the printing speed.
❖ "Skip Feed"
• Use to make the interval between paper feeds longer, allowing the ink
to dry.
• Use to print paper longer than the standard size.
Limitation
❒ The maximum length of paper that can be printed using Skip Feed is 460
mm. However, when printing on paper longer than 432 mm, the deliv-
ered paper may fall off the paper delivery end plate. Therefore, you
should hold the paper so that it does not fall off.
34
Advertisement
Table of Contents
