Table of Contents
Advertisement
[Device Options] tab
This tab includes important items that must be set after the installation of the
printer driver. You can display the functions of this printer by suitably configur-
ing the printer.
Note
❒ When this tab is displayed from the application's print dialog box, only the
[Printer features] group is displayed. To change the configuration of the op-
tions or the memory, choose [Properties] from the [Printer] window, and then
click the [Device Options] tab.
❖ [Printer features]
The functions that can be used in this printer are displayed.
It is possible to make changes using [Change setting for:]. Select the functions
you want to use from [Printer features], and then from the drop down menu in
the [Change setting for:] box, select the settings.
❖ "Printer-Side Operation"
It is possible to perform a few things using both the machine's display pan-
el and the printer driver installed in the computer. When "Printer-Side Op-
eration" is set to "On", the following items are enabled on the display
panel.
• Speed Select
• Cycle Setting
• Separate
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto
Cycle".
❖ Reset Printer Panel
When set to "On", the machine settings return to their defaults before Mas-
ter Making.
❖ "Cycle Setting"
You can select the cycle setting mode of master making and printing.
❖ "Eco. Mode"
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ "Speed Select"
You can select the printing speed.
Windows 95/98/Me
7
1
Advertisement
Table of Contents
