Rtc Battery - HP Pavilion 13 x2 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
Remove the RTC battery:
1. Use a screwdriver to loosen the battery from the socket (1).
2. Lift the battery from the socket (2).
Reverse this procedure to install the RTC battery.
52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
30).
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 44).
Spare part number
739054-001
43).