Table of Contents
Advertisement
Weight
The weight is not spared.
Before removing the weight, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Disconnect the tablet from the keyboard dock (see
on page
5.
Remove the base enclosure (see
6.
Remove the battery (see
Remove the weight:
1.
Remove the Phillips PM2.5×5.0 screw (1) that secures the weight to the dock.
2.
Remove the weight from the dock (2).
NOTE:
Reverse this procedure to install the weight.
42
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
30).
Base enclosure on page
Battery on page
The weight may also be secured to the dock with adhesive.
Releasing the tablet from the keyboard dock
31.
36.
Advertisement
Table of Contents
