CAME LHS A/01 Installation And Configuration Manual page 21

PROGRAMMING ENTRY PANELS WITH VA/01 AND A/01
Entering programming mode
Press and hold the power supply unit [PROG] button for at least 3 seconds.
The LEDswill fl ash together with the [P1-P4] button LEDs.
The [PROG] LED on the power supply unit and entry panel turn on and stay on.
Programming call buttons
Press [P1] to confi gure 2 x two-way buttons (max 4 calls).
Press [P2] to confi gure two single buttons (max 2 calls).
The LED and the call button LEDs will stop fl ashing.
Programming calls
In [Programming calls], the
The call button LEDs will remain on.
In a system with multiple entry panels, you can only program one entry panel at a time only, identifi ed by the lit
LED.
On the remaining entry panels, the
+
– M1
+
PROG
LED and the [PROG] LEDs fl ash.
LED will remain on.
1
2