CAME LHS A/01 Installation And Configuration Manual page 24

Programming the AUTOMATIC DOOR RELEASE function*
*For internal receivers with AUTOMATIC DOOR RELEASE function only
This function is used to open the entrance automatically when there is a call from the entry panel. No communication is
activated and the call ends automatically.
Enabling the function allows the user to activate/deactivate it as required. The function is enabled by default.
End the call and repeat programming for all of the other internal receivers.
Program the function when associating the internal receiver.
Press and hold the
disable the function.
If the
If the
> 5s
button for more than 5 seconds to enable or
LED remains on, the function is enabled.
LED fl ashes, the function is disabled.