Interruption Of Work; Taking Out Of Operation And Cleaning - WAGNER W 600 FLEXIO 18V Manual

Universal sprayer
Hide thumbs Also See for W 600 FLEXIO 18V:
Table of Contents

Advertisement

Available languages

Available languages

W 600 Flexio 18V
Move the spray gun evenly cross-wise or up-and-down, depending on the spray
pattern setting.
An even movement of the spray gun results in an even surface quality.
Important: Wipe off the nozzle and air cap regularly
i
to make sure they do not get blocked.
"Cross spray" when using paint with a poor covering capacity or if the
i
surface is highly absorbent (Fig. 13).
Interior wall paint in strong colour shades should be applied at least twice (allow first
paint coat to dry first). This will ensure good coverage.
For larger projects, it is useful to have a charged spare battery ready to continue
For larger projects, it is useful to have a charged spare battery ready to continue
i
working without interruption.
working without interruption.

17. Interruption of Work

Turn the machine off.
Put the machine down only on a level, clean surface. Otherwise the machine could tip
over!
During longer breaks, vent the container by briefly opening and then closing it again.
Clean nozzle openings after an interruption in operation.
When processing 2-component varnishes, clean the device immediately.

18. Taking Out of Operation and Cleaning

Proper cleaning is the prerequisite for problem-free operation of the paint application
device. No warranty claims are accepted in case of improper or no cleaning.
Never hold the spray gun rear part under water or immerse it into liquids.
Clean the housing only with a moistened cloth.
1) Turn the machine off. Vent the container in case of longer breaks and after the work
has been terminated. This can be done by briefly turning open
and then closing the container or by pulling the trigger guard
and letting the paint into the original paint container.
2) Press the battery lock (13) and remove the battery when you
have finished your work.
3) Divide the spray gun. Press the hook (Fig. 3 b "click") slightly
downwards. Turn the gun front part and gun rear part against
each other and take them apart.
EN
35

Advertisement

Table of Contents
loading

Table of Contents