Preparation Of The Coating Material; Start-Up - WAGNER W 600 FLEXIO 18V Manual

EN

9. Preparation of the Coating Material

•
Mix the material well in the original container. When using interior wall paint, an
agitator is recommended.
W 600 has been developed for use with all conventional paints in their undiluted
i
form. If the surface is smooth and the paint you are using is very thick and
gel-like, dilute it by 10%. Dilution can be necessary if the atomisation is
coarse or if the flow rate is too low even at the maximum setting.
Detailed information about the various materials and the maximum permitted
dilution can be found on the manufacturers' technical data sheets (e.g. available
on the Internet).
Spray material that is at least at room temperature provides a better spray
i
result.

10. Start-up

•
Unscrew the container from the spray gun.
•
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed without
almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards.
(Fig. 2 B)
•
Place the container on a paper base and pour in the prepared coating substance with the
aid of the feed hopper included in the scope of supply (Fig. 1, 17). Screw the container
tightly onto the spray gun.
•
Connect the front part with the rear part of the gun (Fig. 3).
•
Insert battery.
Check that the battery is securely and firmly inserted.
A battery that becomes detached during operation
can cause damage to property or personal injury.
•
Switch the unit on (Pos. I) using the ON/OFF switch (fig. 4, 1).
•
Adjust the spray setting on the spray gun.
The enclosed practice poster is ideal for familiarising yourself with The enclosed practice poster is ideal for familiarising yourself with
i
operation of the spray gun. operation of the spray gun. After trying out the first spray coatings, it
makes sense to test it further on cardboard or a similar surface in order makes sense to test it further on cardboard or a similar surface in order
to find out the right flow rate of paint and air for the best spray pattern. to find out the right flow rate of paint and air for the best spray pattern.
Detailed information about these settings can be found in chapter 11-15. Detailed information about these settings can be found in chapter 11-15.
32
After trying out the first spray coatings, it
W 600 Flexio 18V