Changing Main Fuse - Husqvarna TE 250i EU 2020 Owner's Manual

15 ELECTRICAL SYSTEM
15.4
112

Changing main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
H03744-10
This battery charger is only suitable for lithium iron
phosphate batteries. Read the accompanying fitting
instructions for Husqvarna Motorcycles accessories.
Info
Never remove cover
–
Switch off the battery charger after charging and disconnect
it from the 12-V battery.
Finishing work
–
Install the 12-V battery.
–
Mount the seat. ( p. 69)
–
Install the air filter box cover. (
Preparatory work
(All EU models)
–
Press and hold the switch-off button
idling until the engine stops.
(All US models)
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 69)
Main work
–
1
Pull EFI control unit upward off rubber lugs
to the side.
1
.
( p. 109)
p. 70)
while the engine is
while the engine is
p. 70)
2
and hang