Removing The Shock Absorber - Husqvarna TE 250i EU 2020 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.16
66

Removing the shock absorber

H03692-10
H03693-10
H03694-10
H03698-10
H03695-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove the cable ties.
–
1
Remove screws with the washers.
–
Detach the frame protector in area
–
2
Remove screw .
–
3
Remove fitting .
Info
Raise the link fork slightly to be able to remove the
screws more easily.
–
4
Press angle lever toward the rear.
–
5
Press linkage lever downward.
(All EU models)
–
Disconnect the plug-in connector of the brake light
switch.
–
6
Remove screws .
–
Pull off foot brake cylinder from the push rod.
p. 56)
A
and take it off.