Feature Descriptions
Parameter
16.16.3.2 Configure the Remote Site
Proceed as follows to configure the bandwidth cancellation parameters.
» Log in as expert.
» Open the detailed view of the modulator.
» Change the output frequency to 1400 MHz.
» Open the detailed view of the demodulator.
» Scroll down to Bandwidth Cancellation.
Description
•
Robust: Extended ranges of the parameters in the acquisition loops.
Use the this setting to cope with bigger uncertainties but potentially
increases lock time.
•
Fine: When all parameters are accurately known and set and there is
no change over time, use the fine mode to achieve the fastest lock
time.
Newtec Proprietary
Confidentiality: Unrestricted
MDM9000 Satellite Modem
R3.2_v1.0
/
289
387