Installing The Pan Tilt Head - PROAIM KITE-22 WONDER PACKAGE Setup And Operation Manual

PROAIM KITE-22 WONDER PACKAGE
INSTALLING THE STRESS CABLE

Connect the Head Platform Leveling Cable by hooking the turnbuckle ends .

INSTALLING THE PAN TILT HEAD


Attach the Pan Tilt Head with the Jib. There are 4 mounting holes on the pan tilt as well as
the jib plate. Align the holes and attach it with the screws. Tighten the wing nuts to secure
properly.

Adjust the mounting extension so that the pan motor is in the rear facing position before
mounting.

Install your cable starting at the camera end; leaving enough cable slack for the camera for
full pan & tilt movement, you may need to add Velcro to loop the cable around the jib arm.
POWER HEAD ANATOMY
A Square Mount for Crane / Tripod Stand
B 12v motor for Pan
C Brass Gear for Pan
D Inbuilt XLR Cable connector
E Head Frame
F 12v motor for Tilt
G Brass Gear for Tilt
H Camera Platform
All manuals and user guides at all-guides.com
9