Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
Option 217 License Removal Procedure
1. To start the Keysight License Manager, press Start > Keysight License
2. Right click the on the desired option and click Delete.
3. In the Keysight License Manager dialog box that appears, press or click
4. A message displays stating that the option removal was successful.
Step 29. Enable Options 417
Procedure Requirements
For this step, you will need a USB flash drive.
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must not be running.
— A keyboard and mouse must be connected to the network analyzer.
— Refer to the license message you received from Keysight: Verify that the
Option Enable Procedure
1. Locate the email(s) from Keysight which contain license file attachments.
2. Copy the license file(s) from the email(s) to the root directory of the USB
A single license file may contain more than one feature.
3. Insert the USB flash drive into the PNA's USB drive slot. Within 5 seconds,
Installation Note N5242-90127
Manager > Keysight License Manager . A Keysight License Manager dialog
box will appear.
Yes to confirm delete.
analyzer's model and serial numbers match those on the license message
you received from Keysight.
These emails are a result of
Information" on page
flash drive.
More than one license file may be copied to the USB flash drive.
the PNA–X should display a small "New license installed" message.
"Step 1. Obtain a Keyword and Verify the
18.
45
Advertisement
