Put Batteries In The Remote Control; Turn On The Tv And Vcr; Using The Remote Control To Choose On-Screen Menu Items; Complete The On-Screen Setup Guide - RCA VR546 User Manual

Chapter 1: Connections & Setup

Put Batteries in the Remote Control

1. Insert the batteries matching the polarities (+ and –) on the batteries with the diagram in the battery compartment.

Turn on the TV and VCR

1. Turn on the TV (if the TV you've connected to the VCR is an RCA, GE, Proscan, or Scenium TV, press the TV button
on the remote packed with your VCR).
2. Tune the TV to the correct Video Input Channel.
• If you used a coaxial cable to connect your VCR to your TV, tune the TV to channel 3. Your TV must be set to
channel 3 the first time you set up the VCR. See page 19 for instructions on how to change the output channel
once you have started setup.
• If you used audio/video cables to connect your VCR, tune the TV to its Video Input Channel (see page 27).

Using the Remote Control to Choose On-screen Menu Items

To select an on-screen item, press the MENU button, then the number button on the remote control that matches the
on-screen number. Selecting a menu item can take you to another menu, activate a choice, or activate a data entry field
(such as the hour field in the Set Time menu).
If a number doesn't appear next to an on-screen menu, use the arrow buttons to highlight an item on the screen, and
press OK to select the highlighted item.
Select a language.
Seleccione un idioma.
Choisissez une langue.
1>English
2 Español
3 Français
The first time you turn on the VCR,
you'll be asked to select the
language for the on-screen menus.
VCR MAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
If you ever need to change some of
the settings in any of the menus that
appear in the setup procedure,
choose Setup (press 4 on the remote)
from the VCR MAIN MENU. Note
that the VR546 does not have the
Audio menu, as it is a mono model.
8

Complete the on-screen setup guide

To help you use the VCR as quickly as possible, an on-screen setup
guide walks you through several important menu screens the first time
you turn on your VCR. The first menu item asks you to select the
language for the on-screen menus. The other setup menu items are
listed in this section.
LANGUAGE menu: determines the language in which the on-screen
displays and menus appear.
Note: If you ever need to change some of the settings in any of the menus that
appear in the setup procedure, go to the VCR MAIN MENU (press MENU on the
remote) and choose Setup (press 4).
Chapter 1