Commissioning - Miele marine PG 8059 Operating Instructions Manual

Switching on
Setting
the language
Before using for the first time
During commissioning the following settings must be carried out.
You will be asked to programme settings one after the other
automatically, and currently selected values have a tick  beside
them. The commissioning process follows a set procedure which
cannot be interrupted.
The dishwasher will guide you automatically through the steps
required.
Reactivation is carried out during the first programme following

commissioning.

If the first programme after commissioning is not completed and
the dishwasher is then switched off, the commissioning process
must be carried out again.
The following options (with the exception of "Plumbing
connections") can be altered retrospectively via the "Settings "
menu and "Further settings".
The dishwasher must be connected to the electrical supply.
Press the  button until the button's LED lights up.

The commissioning process starts automatically with setting the
language. You are requested to set the display language.
Language 
deutsch
(
english (GB)
Use the  and  arrow buttons to select the language you want

and confirm your choice using the OK button.
Commissioning
;
,
21