Door - Miele marine PG 8059 Operating Instructions Manual

Problem solving guide

Door

Problem
The door opens again after
being closed.
Door blocked
Warning. Cabinet hot! Open
anyway?
The door is open a fraction
and cannot be closed
using the  button.
Obstruction sensor
102
Cause and remedy
If too much force is used when closing the door, the
Comfort door locking mechanism will reopen the door.
Close the door with less momentum.

Protruding wash load item obstructing the door.
Sort the wash load so that that it does not obstruct the

door.
Close the door.

The Comfort door lock is blocked.
Try to open the door carefully (without using force) by

pulling on the door handle.
If the door is still blocked:
Open the door using the emergency release.

Close the door and try to open it again using the 

button.
If it is still blocked:
Contact the Miele Service Department.

When the  button is pressed, the temperature in the
wash cabinet is over 70 °C.
 When the door is opened, hot steam and chemical
agents can escape!
Open the door only when strictly necessary.

This is not a fault.
The Comfort door lock has opened the door slightly at the
end of the programme.
Open the door. The door can now be closed completely

again using the  button.
This is not a fault.
The door is locked while the door locking mechanism
retracts to the lock position.
Open the door and wait until the door locking

mechanism reaches its final position.