Further settings
Reset
80
Additional functions
It is possible to adapt individual parameters to tailor programme
sequences to particular types of soiling and to optimise the cleaning
result.
Further settings
Select the
Additional functions
Select
relevant menu.
In the following menu you can choose between:
Reset
–
This resets all altered parameters in Additional functions to their
default settings.
Increased water level
–
This increases the amount of water used in all wash programmes.
Interim rinse
–
This introduces an interim rinse to all programmes that support this
feature (see "Programme chart").
Dispensing system
–
This is used for venting the dispensing systems and for naming the
DOS module.
Temperature / time
–
The temperature and holding time can be changed for the main
wash and final rinse stages of a programme.
Select the
Reset
option and confirm your choice with the
OK button.
Reset
Yes
No
(
Yes
Select the
option and confirm your choice with the OK button.
All parameters that have been altered under "Additional functions"
will be reset to the factory default setting.
menu.
and press the OK button to open the