Adding Rinsing Agent - Miele marine PG 8059 Operating Instructions Manual

Adding rinsing agent

Open the door fully.

Unscrew the lid of the rinsing agent reservoir

Add rinsing agent only until it is up to the maximum mark on the

edge of the reservoir.
The reservoir holds approx. 300 ml.
Screw the lid of the rinsing agent reservoir back on securely so that

water cannot get into the reservoir during the wash cycle.
Wipe up any spilled rinsing agent. This prevents over-foaming

occurring during the next programme.
You can adjust the dosage for best results (see "Further settings,
Additional functions").
Adding rinsing agent
35