Removing The Fork Protector; Installing The Fork Protector; Removing The Fork Legs - Husqvarna FC 250 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
50

Removing the fork protector

A01213-10

Installing the fork protector

A01213-11

Removing the fork legs

A01067-10
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the left fork protector.
–
3
Remove screws and take off the right fork protector.
–
Position the fork protector on left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 48)
( p. 94)