Operation Of Control Panel - CareCo Corvus Rapide User Manual

4. OPERATION OF CONTROL PANEL

4.1 IDENTIFICATION OF CONTROL PANEL
Figure 5 - Corvus Rapide Control Panel
BUTTON NAME
Hazard Light
Hi/Lo Switch
Left Turn Signal
Right Turn Signal
Deceleration
Acceleration
Horn
Headlight Switch
Mode Setting
10
OPERATION
Press the Hazard lights button once to switch on, press again to switch off
High / Low mode, see section 4-2
Press the turn signal button once to switch on, press again to switch off
(switches itself off automatically after 30 seconds)
Press the turn signal button once to switch on, press again to switch off
(switches itself off automatically after 30 seconds)
Press low speed button once to decrease speed, the minimum speed is
1
Press acceleration button once to increase speed, the maximum speed
is 8
Press horn button once to sound warning tone when necessary.
Press headlight switch to turn on headlight and tail light.
Press mode setting button to set different mode.