Product Familiarization; Features - Fluke IB117L User Manual

110/113/114/115/117
Users Manual

Product Familiarization

The manual explains features for multiple models. Because models have different features, not all of the
information in the manual may apply to your Meter. Use Table

Features

Table 1 is a list of the features for each Meter.
Switch
Position
OFF The Meter is turned off.
Automatically selects ac or dc volts based on the sensed input
x
with a low impedance input.
AC voltage from 0.06 V to 600 V.
e
Frequency from 5 Hz to 100 kHz.
D
DC voltage from 0.001 V to 600 V.
AC voltage from 6.0 to 600 mV, dc-coupled.
l
DC voltage from 0.1 to 600 mV.
Ω Ohms from 0.1 Ω to 40 MΩ.
Continuity beeper turns on at <20 Ω and turns off at >250 Ω.
s
LoZ low impedance measurement function to simultaneously
k CHEK
test for voltage or continuity.
Diode Test. Displays OL above 2.0 V.
R
Farads from 1 nF to 9999 μF.
S
AC current from 0.1 A to 10 A (>10 to 20 A, 30 seconds on,
10 minutes off). >10.00 A display flashes. >20 A, OL is
j
displayed. DC-coupled.
Frequency from 45 Hz to 5 kHz.
DC current from 0.001 A to 10 A (>10 A to 20 A, 30 seconds
I
on, 10 minutes off). >10.00 A display flashes. >20 A, OL is
displayed.
w
Non-contact sensing of ac voltage.
Note: All ac functions and Auto-V LoZ are true-rms. AC voltage is ac-coupled. Auto-V LoZ, AC mV and
AC amps are dc-coupled.
2
Table 1. Features
Measurement Function
1 to identify the features of your Meter.
110 113 114 115 117