Fluke IB117L User Manual page 21

True-rms multimeter
Table of Contents

Advertisement

Function
99.99 Hz
999.9 Hz
[2]
9.999 kHz
Hz (V or A input)
50.00 kHz
99.99 kHz
Notes:
[1]
All ac ranges except Auto-V LoZ are specified from 1 % to 100 % of range. Auto-V LoZ is specified from 0.0 V. Because inputs below 1 % of range are not
specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted
together. For volts, crest factor of 3 at 4000 counts, decreasing linearly to 1.5 at full scale. For amps, crest factor of 3. AC volts is ac-coupled.
Auto-V LoZ, AC mV, and AC amps are dc-coupled.
[2]
AC Volts Hz is ac-coupled and specified from 5 Hz to 99.99 kHz. Minimum input required above 50.00 kHz typically is >1.1 vac sine. Minimum input typical
and not specified. AC Amps Hz is dc-coupled and specified from 45 Hz to 5 kHz.
[3]
W>10 A unspecified.Duty cycle: >10 A to 20 A, 30 seconds on, 10 minutes off.
k CHEK
[4]
113 only: All
voltage ranges are specified from 60 counts to 100 % of range. Because inputs <60 counts are not specified, it is possible and
normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. Crest
factor of 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
[5]
113 only: After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
Function
Input Impedance (Nominal)
Volts AC
>5 MΩ <100 pF
Volts DC
>10 MΩ <100 pF
Auto-V LoZ
~3 kΩ <500 pF
Ohms
<2.7 V dc
Diode Test
<2.7 V dc
Table 6. Accuracy Specifications (cont.)
Range
Resolution
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.01 kHz
Table 7. Input Characteristics (110, 114, 115, 117)
Open Circuit Test Voltage
Accuracy
± ([% of Reading] + [Counts])
0.1 % + 2
Common Mode Rejection Ratio
(1 kΩ Unbalanced)
>60 dB at dc, 50 or 60 Hz
>100 dB at dc, 50 or 60 Hz
>60 dB at dc, 50 or 60 Hz
Full Scale Voltage
to 6.0 MΩ
<0.7 V dc
2.000 V dc
True-rms Multimeter
Specifications
115, 117
Normal Mode
Rejection
0.5 % + 2
0.5 % + 2
Short Circuit Current
40 MΩ
<350 μA
<0.9 V dc
<1.2 mA
Model
- - -
- - -
- - -
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

113114115117110

Table of Contents