Abilica Row 2.0 Manual page 9

STEP 2
Unscrew the four screws (59) which are pre-installed on the back of the
computer (37). Connect the bottom of the three sensor wires (65) to the three
sensor wires of the main frame (1). Insert the front support (47) into the main
frame (1). Secure this with a washer (14) and an allen screw (63). Connect
the top of the three sensor wires (65) to the three sensor wires on the
computer (37). Attach the computer (37) and the Ipad holder (75) to the
front support and tighten them with the four screws (59).
Note: Please always ensure the connectors of the sensor wires are
connected together in the same color.
9