Abilica Row 2.0 Manual page 11

STEP 4
Unscrew 1 set of washers (14), nylon nuts (23) and allen screws (31) pre-
mounted on the main frame. Pull the ball pin (32) out of the main frame.
Push the slide rail (6) onto the U-shaped connecting tube of the main frame.
Secure this with 1 washer (14), 1 nylon nut (23), 1 allen screw (31), 1 washer
(58) and 1 knob (33).
First remove 2 sets of allen screws (9) and cushion rubbers (10) from the end
of the slide rail (6). Slide the seat (22) onto the slide rail (6). Reattach 2 cushion
rubbers (10) to both sides of the slide rail (6) and align them with the holes.
Secure it with 2 allen screws (9). Fit the end caps (28 & 29) to the back of the
slide rail (6).
11