Abilica Row 2.0 Manual page 10

STEP 3
Unscrew the 4 self-tapping screws (18) which are pre-installed on the two
pedals (17 L/R). Attach the left pedal (17 L) to the left bracket of the pedal
support tube (12). Secure it with 2 self-tapping screws (18). Repeat the same
steps for the right pedal (17 R). Fit the entire pedal support tube (12) in the
center of the main frame (1). Secure this with 2 carriage bolts (16), 2 washers
(14) and 2 domed nuts (15).
Note: Make sure that the pedals (17 L/R) are attached to the pedal support
tube (12) before installing the pedal support tube (12) on the main frame (1).
10