RCA MRP1150 User Manual page 61

Troubleshooting
Common Problem
No sound while playing a DVD
Subtitle and/or audio
language is not the one
selected from the initial
setting
No on-screen display
The menu is displayed in a
Foreign language
Play doesn't begin when
a title is selected
No forward or reverse scan
Disc won't play
Desired angle cannot
be changed
Picture is not displayed
Chapter 6
Other Information
Solution
• The DTS option is selected but your receiver has no
DTS decoder, or you don't have a receiver
connected.
• If the subtitle and/or audio language does
not exist on the disc, the initial settings will not be
seen/heard. The disc's priority language is selected
instead. Set the subtitle and or audio language
initial setting manually.
• The Off setting is selected for OSD Display; select
On in the setup menu.
• The Menu Language preference is set to that
language. With no disc playing, press the MENU
button on the remote. From the main menu, press 3
to access the PLAYER MENU LANGUAGE screen.
• The rating level has been set and the disc is subject
to that restriction.
• Some DVDs have sections that prohibit rapid
scanning, or title and chapter skip.
• Both the player and the DVD is coded by region. If
the regional codes don't match, the disc cannot be
played. This player is Region No. 4. Check the disc
code.
• Verify that the disc is a type that this player can read.
• Clean the disc.
• Try another disc to see if the disc that won't play is
bad.
• Some DVDs do not have the multi-camera angle
system, and some discs have it only on certain
portions.
• Make sure the TV SCREEN feature in the setup
menu is set with correct aspect ratio for your
television.
• Make sure the VIDEO OUTPUT switch on the back
of your DVD player is set to the type of output you
are using – YPbPr for Composite Video or S-VIDEO
for an S-Video connection.
59