Table of Contents
Advertisement
Connections and Setup
Install Batteries in the Remote
1.
Remove the batter y compar tment cover on the back of the r
2.
Insert new batteries. Match the polarities (+ and –) on the batteries with
the diagram on the r emote.
3.
Put the batter y compar tment cover back on the r emote.
Important Battery Information
•
If you'r e not going to use the r emote for a month or mor e, be sur e to
remove the batteries because they can leak and cause damage.
•
Dispose of batteries in the pr oper manner , accor ding to federal, state, and
local r egulations.
•
Any batter y may leak electr olyte if mixed with a dif fer ent batter y type, if
inser ted incor rectly, if all batteries ar e not r eplaced at the same time, if
disposed of in fir e, or if an attempt is made to char
intended to be r echar ged.
•
Discard leaky batteries immediately. Leaking batteries can cause skin
bur ns or other personal injur y.
Point the Remote in the Right Direction
When you want the r emote to operate the DVD Player , point the r emote at the
DVD Player, not the TV. The remote has to be pointed in the cor
and towar d the cor rect component in or der for the r emote contr ol's signal to
communicate with the sensor on the component. Make sur
path between the r emote contr ol and the component you want to operate so
the signal isn't blocked.
Turn on the TV and DVD Player
1.
Turn on your TV and tune to the cor rect video input channel (see
following page).
2.
Press the ON•OFF button on the r emote or on the DVD player itself.
14
emote.
ge a batter y not
rect dir ection
e ther e is a clear
Chapter 1
Advertisement
Table of Contents
