Table of Contents
Advertisement
Program Playback
Program playback lets you set up a specific order to play back the tracks on a
disc.
1.
Press the PLAY MODE button on the remote (the PLAY MODE screen
appears).
2.
Use the left/right arrow buttons to highlight the first track to add to the
program and press OK. The selected track appears in the Program Order
box.
3.
Repeat Step 2 to add additional tracks. Up to 20 chapters may be
programmed at once.
4.
Press PLAY to begin playing the program.
To resume normal playback, use the CLEAR button to remove programmed
tracks.
Deleting Programmed Chapters
1.
Press the PLAY MODE button on the remote (after a moment the play
mode info banner appears).
2.
To remove the last chapter that was added to the program, press the
CLEAR button. Each subsequent press of the CLEAR button deletes the
next chapter in the opposite order the chapters were programmed.
All programmed chapters are deleted when the disc is removed or the DVD
player is turned off.
Chapter 4
Playing Video CDs
43
Advertisement
Table of Contents
