Playing Audio CDs and MP3 Discs
Loading and Playing an Audio CD
Before you load a disc, make sure that it is compatible with the player. Note
that the following discs CANNOT be used with this player:
•
Laserdisc
•
CD-I, CD-ROM, CD-R, DVD-ROM
•
MiniDisc
•
CD-G discs play audio only, not graphics
To Load and Play an Audio CD
1.
2.
Insert with the
3.
label facing up.
4.
Audio CD Playback Features
When playing audio CDs, your DVD player has many of the same features that your CD player has,
including track skip, repeat play, and programmed playback.
Selecting a Specific Track
The current track number and elapsed playback time for that track are displayed on the front of the
player. You can also see this information by accessing the info banner (by pressing INFO on the
remote).
Use the up/down arrow buttons to highlight a track and press OK. You can also use the number
buttons on the remote to enter the desired track number. You must enter a 2-digit number. For
tracks 1–9 of a CD, press 0 and then the track number, and then press OK.
Random Playback
Random playback plays a disc's tracks in random order.
1.
Press PLAY MODE on the remote control (the Play Mode info banner appears).
2.
Use the left/right arrow buttons to highlight Random on the info banner.
3.
Use the up/down arrows buttons to toggle Random on or off. Press OK.
To stop random playback, press STOP twice or press the PLAY MODE button, highlight Random
and use the up/down arrow buttons to select Off.
34
Press the OPEN•CLOSE button on the front of the DVD player.
Place a disc gently into the tray with the disc's label facing up.
Press PLAY to close the disc tray.
The DVD player reads the disc's table of contents, and then begins disc playback.
Press STOP to stop playback.
Chapter 3