Using The Repeat Feature; Repeating A Track Or Disc; A-B Repeat - RCA MRP1150 User Manual

Playing Audio CDs and MP3 Discs

Using the Repeat Feature

There are four repeat options:
• Off
• Track – repeats the track that is playing
• Disc – repeats the disc that is playing
• A–B Repeat – repeats a selected segment of the disc
A–B Repeat
A–B Repeat lets you repeat a specific segment on the CD that you define. For
example, if you want to listen to a particular guitar riff within a song, you can
set the A–B Repeat to play that part of the song over and over.
1. At the start of the segment you want to repeat, Press REPEAT on the
remote. The repeat banner appears.
2. Use the left/right arrow buttons to highlight the A, and press OK to mark
the beginning of the segment. The B is automatically highlighted.
3. Allow the CD to play to the end of the segment you would like to mark.
You must let the CD play in standard playback mode to set the B point in
the A–B Repeat. If you rewind or fast-forward the CD, the A–B Repeat is
cancelled.
4. Press OK. The A–B Repeat that you set plays until you turn off Repeat.
Repeat functions remain active until you turn them off, open the disc tray
or turn off the power.
5. To turn off Repeat, press the REPEAT button on the remote, use the arrow
buttons to highlight Off, then press OK.
36

Repeating a Track or Disc

1. While a disc is playing, press REPEAT. The repeat
banner appears.
2. Use the left/right arrow buttons to highlight either
Track or Disc.
3. Press OK.
Chapter 3