Warning And Safety Instructions - Miele H 340 Operating Instructions Manual

This appliance complies with all rele-
vant legal safety requirements. Im-
proper use of the appliance can,
however, present a risk of both per-
sonal injury and material damage.
Before installation and before using
the appliance for the first time, read
the operating instructions carefully.
They contain important notes on
safety, on the installation, operation
and care of the appliance. This way
you will avoid the risk of accidents
and damage to the appliance.
Keep these instructions in a safe
place and pass them on to any fu-
ture user.
Correct usage
The appliance is intended for do-
mestic use to cook food, and in
particular to bake, roast, defrost, cook,
dry fruit etc, and to grill.
Any other usage is at the owner's risk
and could be dangerous. The manufac-
turer cannot be held responsible for
damage caused by incorrect or im-
proper use of the appliance.
Do not let children access the ap-
pliance or its controls. Supervise its
use by the elderly or infirm. If allowing
older children to use the appliance
without supervision please ensure that
they are aware of how the oven works
and understand the dangers of im-
proper use,

Warning and Safety instructions

Technical safety
Before connecting the appliance to
the mains supply make sure that
the voltage and frequency correspond
to the rating on the data plate, other-
wise the appliance could be damaged.
Consult a competent person if in doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ap-
pliance and an effective earthing sys-
tem, which complies with local and na-
tional regulations. It is most important
that this basic safety requirement is
tested by a qualified electrician. The
manufacturer cannot be held responsi-
ble for the consequences of an inade-
quate earthing system (e.g. electric
shock).
This appliance must only be oper-
ated as a built-in appliance. This is
necessary to ensure that all electrical
components are shielded.
Never open the casing of the appli-
ance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
Installation work and repairs may
only be carried out by a suitably
qualified and competent person in ac-
cordance with national and local safety
regulations. Repairs and other work by
unqualified persons could be danger-
ous. The manufacturer cannot be held
responsible for unauthorised work.
11