Miele H 340 Operating Instructions Manual page 54

Cleaning and care
The two pyrolytic programmes differ
only in length.
The heating phase is limited in "Pyroly-
sis O" to approx. 90 minutes, and in
"Pyrolysis P" to approx. 120 minutes.
The heating phase in both programmes
is followed by a cooling down phase
which lasts approx. 40 – 45 minutes.
you will be able to hear the cooling fan
during this period.
You cannot delay the start of
pyrolytic cleaning. Do not operate
the timer during pyrolysis. This
would interrupt the pyrolytic process
and in certain circumstances the
door lock may not be released.
54
Starting a pyrolytic process
^ Depending on the level of soiling turn
the function selector to either "Pyroly-
sis O" or "Pyrolysis P".
The indicator light above the tempera-
ture selector starts to flash.
^ Turn the temperature selector to the
"." position.
The indicator light will go out until the
door catch is engaged and the door
lock activated.
When the light comes on again the
oven starts to heat up.
At the end of the pyrolytic process the
indicator light will stay on until the oven
temperature has fallen below 200 °C.
The indicator light will then go out to
show that the pyrolytic cleaning pro-
cess has finished.