ESAB Aristo Mig WeldCloud U5000i Instruction Manual page 13

3 TECHNICAL DATA
VRD function activated
Operating temperature
Transportation temperature
Dimensions l × w × h
without cooling unit
with cooling unit
Continual sound pressure at no-load
Weight
without cooling unit
with cooling unit
Insulation class transformer
Enclosure class
Application class
1)
Valid for power sources without VRD specification on the rating plate.
2)
Valid for power sources with VRD specification on the rating plate. The VRD function is
explained in the instruction manuals for the control panel, if the panel has that function.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 104 °F (40 °C) or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Cooling power
Coolant
Coolant quantity
Maximum water flow
Maximum number of water-cooled
welding torches that may be connected
0463 666 001
2)
Cooling unit
2.0 kW at 104°F (40°C) temp. difference and flow
0.26 gal/min
ESAB's ready mixed coolant
1.5 gal
0.6 gal/min
Two GMAW welding torches or
one GTAW torch and one GMAW welding torch
- 13 -
Mig U5000i WeldCloud™
< 35 V
32 to 104°F (14 to 104 °F)
(-10 to +40°C)
32 to 104°F (-4 to 131 °F)
(-20 to +55 °C)
24.6 × 15.5 × 19.5 in.
(625 × 394 × 496 mm)
24.6 × 15.5 × 30.6 in.
(625 × 394 × 776 mm)
<70 dB (A)
83 kg (183 lb)
103 kg (227 lb)
H
IP23
© ESAB AB 2020