ATH-Heinl ATH Four Lift 64AP User Manual page 73

Hide thumbs Also See for ATH Four Lift 64AP:

Table of Contents

Available languages

This is where the complete electrical control system is located. All buttons are protected by a front ring to prevent unintentional

operation. Furthermore, all movements are immediately interrupted when the buttons are released (dead-man control).

Hydraulic unit

Here, the hydraulic oil is fed from the tank through a gear pump, which is driven by the electric motor, to the lifting cylinder. The

oil can flow back to the tank via the lowering valve.

They prevent the platform from descending more than 100 mm in case of any deficiency and keep the platform in the parking

position. Pneumatic cylinders unlock the device each time a lowering is performed.

Rope break safety switch

Drive-on ramps with roll-off protection function

This device prevents the vehicle from rolling down when raised.

Roll-off protection

This device prevents the vehicle from rolling down when raised.

This device stops the platform during downward movement at a height of 400 mm.

Ventilated tank cap

Solenoid valve

Release date: 02.06.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG

Chapters

Table of Contents