Player; Ndi Decoder; Ndi Encoder - RGBlink TAO 1pro Quick Start Manual

Player

1. Insert a USB flash drive into the USB 2.0 port and then play the video in the USB.
2. Press the icon to enter the [Player] interface and select the video you want to play.
Note: If there is no USB flash drive inserted, the icon displays gray status.

NDI Decoder

1. Set the IP address (same as the network of camera ), subnet mask and gateway in [Network Settings] of [Scroll
Area].
2. Press the icon to turn on the switch to start NDI decoding function.

NDI Encoder

Press the NDI decoding icon to enter the interface to set relative parameters.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
2
9 / 14