Figure 5 Seating the
TC2201 Bridge
Figure 6 Securing the
TC2201 Bridge
Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
Ejector latches
4 Secure each bridge to the CPCI card cage by tightening the captive screws
located in the ejector latches with a PHILLIPS screw driver (see
Captive screws
5 Repeat
step 2
through
using the next available card cage slot.
TC2201 Upgrade Procedure
Ejector latches in
locked position
step 4
for additional TC2201 bridges if necessary,
81-81792-01 A01
July 2007
figure
6).
7