Quantum Scalar 50 Upgrade Instructions page 18

Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
81-81792-01 A01
July 2007
18
e To create a specific map item, the Index, Bus, and Device can be
selected from the pull-down lists for either
Manual Device Entry
already discovered.
up a device type at a specific
the changes permanent, select the
Maps named
Note:
filled, or have entries removed.
Note: Map settings are saved to memory when any of the buttons
within the page are selected but are not activated until either
the
Activate Mapping Changes
is rebooted.
9 After the iSCSI ports are mapped, select the
button to dynamically update the current map without rebooting the
TC2201. These changes are made effective immediately after being
submitted.
Caution: Before activating any port mapping changes, it is strongly
recommended that the user verify there are not any
command or data operations occurring in conjunction
with devices affected by the mapping changes. For
example, deleting a LUN or device from a map may
disrupt I/O transfers with that device. It is the user's
responsibility to ensure that no operations will be
negatively impacted due to the activation of mapping
changes.
Note: All current Mapping Settings will take effect immediately! If
another management interface has made unsaved mapping
changes, those changes will be lost.
If the
Note:
Activate Mapping Changes
mapping changes will not take effect unless the TC2201 is
rebooted.
10 After activating the mapping options for the Ethernet ports, click
from the menu.
Main
The
System Reboot
TC2201 Upgrade Procedure
.
Discovered Device Entry
Manual Device Entry
Device Target
Create Entry
may not be modified, cleared,
Auto Assigned
button is selected or the TC2201
button is not selected, the
screen displays (see figure
Discovered Device Entry
is limited to devices
allows you to manually set
and . To make
Device LUN
button.
Activate Mapping Changes
Reboot
19).
or