Installing The Integrated Storage Controller Card - Dell Precision Rack 7910 Owner's Manual

Figure 31. Removing and installing the integrated storage controller card
1. integrated storage controller cable
3. integrated storage-controller card connector on the
system board
Next steps
1. Replace the expansion-card riser 1.
2. Replace the cooling shroud.
3. Follow the procedure listed in

Installing the integrated storage controller card

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
4. Remove the expansion-card riser 1.
5. Keep the #2 Phillips screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
After working inside your
Safety instructions.
Before working inside your
2. integrated storage controller card
4. integrated storage controller card holder
system.
system.
Installing and removing system components 59