Installing The Memory Modules; Sd Card Reader (Optional); Removing The Sd Card Reader - Dell OptiPlex 7080 Tower Service Manual

Installing the memory modules

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the side cover.
2. Follow the procedure in

SD card reader (optional)

Removing the SD card reader

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
38 Disassembly and reassembly
after working inside your computer.
before working inside your computer.